GDI Engine Service

Walnut Blasting in Port Coquitlam

Intake valve carbon cleaning since 2019. More than 200 engines cleaned, same day.

Back to Services
Walnut Blasting GDI Engine Service

NAPA AUTOPRO - Poco Automotive has performed walnut blasting in Port Coquitlam since 2019. We've completed more than 200 intake valve cleanings with dedicated walnut blasting equipment, removing hardened carbon from gasoline direct injection (GDI) engines.

A typical job costs approximately $600 to $800 and is done the same day.

Does Your Engine Have These Symptoms?

Slight misfires on cold mornings, rough idle, hesitation, or fuel consumption creeping up are the most common signs of intake valve carbon buildup.

The decline is slow, so most drivers don't notice it. After a cleaning, the most common thing we hear is that the car feels like new again.

Book Walnut Blasting

Why GDI Engines Need It

In a direct injection engine, fuel is injected straight into the cylinder and never washes over the intake valves. Oil vapour bakes onto the valves and slowly hardens into carbon that restricts airflow. Once it's hard, fuel additives and chemical cleaners can't remove it.

As a shop with a strong focus on German vehicles, we saw this problem early. Volkswagen, Audi and BMW moved to direct injection before most other manufacturers, so their engines were the first ones we cleaned. Today we clean GDI engines of all makes.

A Recent Job: VW Golf 1.8L at 180,000+ km

This Golf came in for a water pump replacement, which requires removing the intake manifold. Based on the engine and mileage, we told the customer beforehand that we expected carbon buildup. Our technician Tre Ena-Laqui cleaned the valves during the same visit, which saved the customer a second round of disassembly labour.

VW Golf 1.8L intake valves coated in hardened carbon before walnut blasting

Before: intake valves heavily caked in carbon.

The same VW Golf intake valves and ports cleaned to bare metal after walnut blasting

After: the same ports and valves, cleaned back to metal.

Read the full write-up: What Is Walnut Blasting? Why Your Engine May Need It.

What's Included

  • Intake manifold removal and reinstallation
  • Walnut blasting of every intake port and valve, one cylinder at a time with the valves closed, with debris vacuumed out
  • New intake manifold gaskets on every job
  • Throttle body cleaning and new fuel injector seals when the engine needs them
  • Same-day turnaround: morning drop-off, end-of-day pickup

Cost

Walnut blasting typically costs approximately $600 to $800. The price depends on how much of the engine has to come apart to reach the intake, the number of cylinders and how heavy the deposits are. We quote your specific vehicle before any work starts.

It costs less when paired with another repair that already removes the intake manifold, such as a water pump or intake-side gasket job. About 70% of our cleanings are done this way. See our other auto repair prices.

How We Decide If You Need It

We look at the engine type, its age and its mileage. After more than 200 cleanings, we know which engines are prone to carbon buildup. If we expect to find carbon during another repair, we tell you before the job so you can decide whether to clean it while the engine is open. If you have symptoms, we diagnose them first to confirm carbon is the cause.

Two GDI intake valves: one caked in carbon, one with a piece broken off the valve head

Left: carbon that robs performance. Right: valve damage severe buildup can lead to.

Prevent It With GDI Induction Cleaning

Our GDI induction cleaning service chemically cleans the intake before deposits harden. We generally recommend it every 30,000 to 50,000 km. It won't remove carbon that's already baked on, but it slows new buildup. Learn more in our GDI engine service guide.

Why Choose Poco Automotive?

200+ Cleanings Since 2019Dedicated walnut blasting equipment
German Vehicle FocusWorking on VW, Audi and BMW GDI engines from the start
NAPA AUTOPRO Warranty3 years / 60,000 km Peace of Mind coverage
Serving Port Coquitlam Since 1976Quote and your approval before any work

Get Your Engine Breathing Again

Tell us your vehicle and we'll give you a quote.

Drop it off in the morning and pick it up at the end of the day.

Book Walnut Blasting

Common Questions

Where can I get walnut blasting in Port Coquitlam?

NAPA AUTOPRO - Poco Automotive at 1850 Kingsway Ave #20, Port Coquitlam, BC performs walnut blasting with dedicated equipment. We've done walnut blasting since 2019, have completed more than 200 cleanings, and serve Port Coquitlam, Coquitlam, Port Moody, Pitt Meadows and Maple Ridge. Call (604) 941-7322 to book.

How much does walnut blasting cost in Port Coquitlam?

At NAPA AUTOPRO - Poco Automotive, walnut blasting typically costs approximately $600 to $800 CAD. The price depends on how much has to come apart to reach the intake, the number of cylinders and how heavy the deposits are. It costs less when paired with another repair that already removes the intake manifold. We quote your specific vehicle before starting.

How long does walnut blasting take?

Walnut blasting is a same-day service at NAPA AUTOPRO - Poco Automotive. We recommend dropping the vehicle off in the morning and picking it up at the end of the day.

What is included with walnut blasting?

Every walnut blasting job at NAPA AUTOPRO - Poco Automotive includes new intake manifold gaskets. Throttle body cleaning and new fuel injector seals are added when the engine needs them.

How do I know if my engine needs walnut blasting?

Common signs are slight misfires on cold mornings, rising fuel consumption, rough idle and a gradual loss of power. We also look at the engine type, age and mileage, since some GDI engines are known to build up carbon. If another repair is already removing the intake manifold, we'll tell you beforehand if we expect to find carbon.

Can a chemical GDI cleaning do the same job?

No. Chemical GDI induction cleaning is preventive maintenance for early deposits, best done every 30,000 to 50,000 km. Once carbon is hard and baked onto the valves, chemical cleaning can't remove it and walnut blasting is needed.

Ready to Book a Service?

Call or text us during business hours

(604) 941-7322
or
Book Appointment